Engine & Exhaust Gaskets
Your bike
About
Engine and exhaust gaskets for a Harley-Davidson seal the joints that see the most heat and pressure on the bike, at the cylinder base, the cylinder head, the primary case and the exhaust port. When one fails, the signs are easy to read: oil seeping at a base, a hiss or a tick at the exhaust, or a primary case that drips.
The collection holds complete engine gasket sets, which bring together the gaskets and seals for a full rebuild, and top end sets for work limited to the cylinders and heads. Cylinder base gaskets are also listed on their own, for the joint between cylinder and crankcase. Primary housing gaskets seal the primary cover, and exhaust gaskets sit in the port of the cylinder head, where the header pipe is held by its flange.
Choose by the Harley-Davidson part number shown on the exploded diagram of the engine or in the parts catalog, then confirm the model year, since bore size and engine generation change the gasket. A top end set may not include the base gaskets, and an engine set may leave out the exhaust gaskets, so read what each kit contains before ordering. Exhaust gaskets are normally renewed whenever a header comes off. Some of these references have since been superseded.
