Nuts & Washers
Your bike
- Custom flange nut kit

€361.76
- Chrome axle cap nut kit

€36.50
- Dome nut, 1/4-20 UNC

€3.85
- Dome nut, 1/4-28 UNF

€3.85
- 5/16-24 UNF dome nut

€3.85
- Dome nut, 3/8-16 UNC

€3.85
- Dome nut, 3/8-24 UNF

€3.85
- Windshield acorn nut kit

€15.61
- 10-32 acorn nut kit
€9.08
- Acorn nut kit 1/4-28

€9.08
- 3/8-16 acorn nut kit

€9.08
- 3/8-24 acorn nut kit

€9.08
- 1/2-20 acorn nut kit

€9.08
- 3/8-16 bungee nut

€16.92
About
Nuts and washers hold much of a Harley-Davidson together, from the nuts on the engine and frame studs to the small ones that secure a bracket, a cover or a lamp. This collection holds those two fastener types on their own.
Nuts on a motorcycle come in several forms: plain hex nuts, flange nuts with a built-in washer face, self-locking nuts that resist working loose, and acorn or cap nuts that close over the end of a stud for a finished look. Washers spread the load under a nut or a bolt head, protect a painted or chrome surface from the tool and the fastener, take up a small gap, and in the case of lock washers help a joint stay tight under vibration.
Fitment is confirmed on the Softail, Dyna and Touring bikes, the Trike and CVO models. The thread and size of a nut have to match the stud or bolt it goes on, and its finish can be chrome, black or plain where it sits out of view. A self-locking nut is often meant to be used only once, so the service manual may call for a new one at reassembly. Each nut and washer is identified precisely by its Harley-Davidson part number, and some of those numbers have been superseded.



