FLD 1GZ4 DYNA SWITCHBACK (2012)
Fuel induction module
21 parts
This exploded view details the 21 parts of the Fuel induction module subassembly for FLD 1GZ4 DYNA SWITCHBACK (2012). Click a part number in the table to open its page.
Exploded view
Parts list
| # | Ref. | Name | Qty | Price | Buy |
|---|---|---|---|---|---|
| 1 | 3275Hex socket cap screw | Hex socket cap screw SCREW,HEX SCKT CAP | 4 | €3.83 | |
| 2 | 11291MAP sensor mounting seal | MAP sensor mounting seal SEAL,MTG,MAP SENSOR | 1 | €3.35 | |
| 3 | 26993-06Symmetric intake flange | Symmetric intake flange FLANGE,SYMETRIC-INTK | 2 | €7.31 | |
| 4 | 26995-86BIntake seal | Intake seal SEAL,INTAKE | 2 | €4.49 | |
| 5 | 27381-06Intake air temperature sensor kit, EFI/T | Intake air temperature sensor kit, EFI/T KIT SENSOR,AIR INTK TEMP,EFI/T | 1 | €49.94 | |
| 6 | 27709-06AFuel injector | Fuel injector FUEL INJ,X | 2 | €167.59 | |
| 7 | 27651-06Fuel rail service kit, EFI/TC88 | Fuel rail service kit, EFI/TC88 KIT FUEL RAIL,SERV,EFI/TC88 | 1 | €235.94 | |
| 8 | 27655-06IAFM hardware kit, EFI/TC88 | IAFM hardware kit, EFI/TC88 KIT HARDWARE IAFM,EFI/TC88 | 1 | €57.83 | |
| 9 | 27658-06Idle air control kit, EFI/TC88 | Idle air control kit, EFI/TC88 KIT AIR CONTROL,IDLE,EFI/TC88 | 1 | €88.64 | |
| 10 | 27659-06Throttle position sensor kit, EFI | Throttle position sensor kit, EFI KIT SENSOR,THRTL POSITION,EFI/ | 1 | €94.96 | |
| 11 | 27708-06BInduction module assembly | Induction module assembly INDUCT'N MODULE ASY(PO) | 1 | NLA | |
| 11 | 27684-06Throttle cable housing and stop | Throttle cable housing and stop HOUSING & STOP,THRTL CABLE | 1 | €24.34 | |
| 12 | 32417-10Chemical/gas sensor, X | Chemical/gas sensor, X SENSOR,CHEM/GAS,X | 1 | €239.35 | |
| 13 | 69607-06IAT jumper wiring harness | IAT jumper wiring harness HARNESS,IAT JUMPER | 1 | NLA | |
| 14 | 72062-062-way female housing | 2-way female housing HOUSING, 2-WAY FEMALE | 1 | €7.82 | |
| 15 | 72094-06Female socket terminal, #18 AWG | Female socket terminal, #18 AWG TERMINAL,SCKT,FEM,#18AWG | 2 | €0.91 | |
| 16 | 72096-06Wire seal, #18 AWG/yellow | Wire seal, #18 AWG/yellow WIRE SEAL,#18 AWG/YELLOW | 2 | €0.91 | |
| 17 | 74102-98BK2-way pin housing, black | 2-way pin housing, black HOUSING 2 WAY PIN BLACK | 1 | €5.59 | |
| 18 | 74142-982-way secondary pin lock | 2-way secondary pin lock SECONDARY LOCK,2WAY,PIN | 1 | €0.91 | |
| 19 | 74190-98Pin terminal, #16-20 AWG | Pin terminal, #16-20 AWG TERMINAL,PIN,#16-20AWG | 2 | €0.91 | |
| 20 | 90383-98Induction module cap plug | Induction module cap plug CAP PLUG,INDUC'TN MODULE | 1 | €5.26 | |
Ask a question
A question about this exploded view or one of its parts? Write to us and we will answer by e-mail.
Other diagrams for FLD 1GZ4 DYNA SWITCHBACK (2012)
See moreAbout this exploded view
On the FLD 1GZ4 DYNA SWITCHBACK (2012), a Dyna model, the “Fuel induction module” assembly is made up of 21 listed parts. Of these, 19 can be ordered online, and 2 are marked “NLA”. Among the parts shown: MAP sensor mounting seal, symmetric intake flange, and Intake air temperature sensor kit, EFI/T. Parts can differ by market and production date, so the motorcycle’s VIN remains the reference for checking a part.
On fuel-injected engines, air and fuel meet in the induction module, which combines the throttle body, the intake manifold and the injectors. The intake manifold is attached to the cylinder heads through flanges and seals, and carries the fuel injectors fed by the fuel rail. A throttle body gasket, a temperature sensor, a purge tube cap and a mounting hardware kit are also part of it. Depending on the generation, the throttle body is cable-operated or electronic and the injector arrangement differs. Vacuum leaks at the intake seals, a faulty injector or an intake upgrade are the usual reasons to remove it.